Catalytic Converter Type Approved + Fitting Kit Front BM80259HK BM Catalysts New

  

Please use the make model tool above to check the part fits your vehicle. Catalytic Converter Type Approved + Fitting Kit Front BM80259HK BM Catalysts. To be used with part number(s). Increase in efficiency due to higher loadings of precious metals. Unique approval number for each BM part number.

Our parts are Type Approved in order to conform to the current UK legislation laws which have been in force since August 2009. The law states that for vehicles registered on or after 1st March 2001, all replacement catalytic converters and CAT-DPF units must meet the set standards for emissions before they are granted with approval.

Each part numbers carries a unique EC Approval number which is pin stamped onto the part. The UK differs slightly from the European laws as all parts entering the EU market must be type approved (or "Homologated" as it is referred to). As such we offer approved parts for vehicles prior to the 2001 deadline in order to also conform to the European regulations.

Catalytic Converters (Catalyst / Cat). What are they and how do they work?

A Catalytic Converter (Cat) is an emissions control device that reduces the level of harmful exhaust gasses that enter the atmosphere. It works by converting exhaust emissions into less harmful ones when the gasses pass through it, triggering a chemical reaction. A vehicle will fail an emissions test on either, or all, of the following factors. CO Failure can mean several things, but is most likely caused by a poorly running vehicle. If a Cat becomes contaminated with unburned fuel, it will become unable to effectively convert the gasses that pass through it.

A new Cat at full capacity will almost certainly lead to a MOT pass, but unless the fault is rectified, the customer will return the next year complaining of the same problem. HC Failure is an indicator that the vehicle is over-fuelling. A vehicle will fail on this reading if it has HCs in excess of 200ppm.

HCs in excess of 60ppm indicates a vehicle problem that needs rectifying as soon as possible. Lambda Failure means there is a problem with the air:fuel ratio on the vehicle. If the lambda reading is less than 0.97, the vehicle is running too rich. If the lambda reading is greater than 1.03, the vehicle is running too lean. Compatible with the following OEM references.

51774042, 51774364, 51780170, 51800716, 51800929, 55185920, 55195428, 60801909, 60802078, 60802079, 60816799. ALFA ROMEO 147 (937_) 1.9 JTD 937. Fitting Position: Front; Construction Year from: 09/2001; Emission Standard: Up to Euro 4.

Fitting Position: Front; Emission Standard: Up to Euro 4. ALFA ROMEO 147 (937_) 1.9 JTD 16V 937. ALFA ROMEO 147 (937_) 1.9 JTDM 16V 937. ALFA ROMEO 147 (937_) 1.9 JTDM 8V 937.

Fitting Position: Front; Engine Code: 937 A3.000; Vehicle Equipment: for vehicles with diesel particulate filter (DPF); Emission Standard: Up to Euro 4. ALFA ROMEO 156 (932_) 1.9 JTD 932. ALFA ROMEO 156 (932_) 1.9 JTD (932AXE00). ALFA ROMEO 156 (932_) 1.9 JTD 16V (932AXE00). ALFA ROMEO 156 Sportwagon (932_) 1.9 JTD (932B2B, 932B2C).

ALFA ROMEO 156 Sportwagon (932_) 1.9 JTD (932BXE00). ALFA ROMEO 156 Sportwagon (932_) 1.9 JTD 16V Q4 (932BXN20).

FIAT BRAVO II (198_) 1.9 D Multijet (198AXB1A). Fitting Position: Front; Construction Year to: 04/2010; Vehicle Equipment: for vehicles with diesel particulate filter (DPF); Emission Standard: Up to Euro 4. FIAT DOBLO Box Body/MPV (223_) 1.9 JTD Multijet. Fitting Position: Front; Construction Year to: 03/2011; Vehicle Equipment: for vehicles with diesel particulate filter (DPF); Emission Standard: Up to Euro 4. FIAT DOBLO MPV (119_, 223_) 1.9 D Multijet.

FIAT MULTIPLA (186_) 1.9 JTD (186AXE1A). Fitting Position: Front; Construction Year from: 01/2005; Vehicle Equipment: for vehicles with diesel particulate filter (DPF); Emission Standard: Up to Euro 4.

FIAT MULTIPLA (186_) 1.9 JTD 110. Fitting Position: Front; Construction Year from: 05/2001; Emission Standard: Up to Euro 4. FIAT MULTIPLA (186_) 1.9 JTD 115. FIAT STILO (192_) 1.9 D Multijet. Fitting Position: Front; Vehicle Equipment: for vehicles with diesel particulate filter (DPF); Emission Standard: Up to Euro 4.

FIAT STILO (192_) 1.9 JTD (192_XE1A). Fitting Position: Front; Construction Year from: 01/2002; Engine Code: 192 A1.000; Engine Code: 937 A7.000; Emission Standard: Up to Euro 4. FIAT STILO Multi Wagon (192_) 1.9 D Multijet (192DXT1B).

FIAT STILO Multi Wagon (192_) 1.9 JTD. LANCIA LYBRA SW (839_) 1.9 JTD 839.

This can include addresses in Scotland, Northern Ireland, Isle of Man, Shetland Islands and Channel Islands.