HC800 is a genuine'cross over' pad suitable Forboth road and race. HC800 is extremely capable in competition environments so use this pad if you are involved in serious track day, rally etc. Along with temperature capabilities, HC800 is renowned as a'drivers pad' with unmatched driver feel and control.When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a'gas layer' between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won't slow down as normal. This phenomenon is known as'fade'. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. Rotor slots also assist to provide the same solution. Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This'problem' is reduced or eliminated by the chamfer on the pad material. Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car. Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process'burns out' unwanted materials in advance, reducing the gases that can cause fade.
As a result, Project-Mu brake pads only need light'bedding in' to match the pad to your rotor surface. Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad.Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors. We must be notifying within 10 days of receipt if an item is damaged or not delivered.
We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part Foryou.If shows delivered we will try to retrieve package no guarantee. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Pads". The seller is "cjmotor" and is located in this country: AU. This item can be shipped worldwide.